Prior to Revit 2022 if you needed a tapered wall you would need to build it as an in-place family. In Revit 2021 a new parameter was added to walls called “Cross-Section”. There were 2 options. Vertical and Slanted. In Revit 2022 there is a 3rd option – Tapered.
After changing the wall to tapered you can adjust the angles of each face of the wall and control where the width of the wall is measured. (top of wall, bottom of wall, or base is at level line that wall is inserted on.)
- You can use positive or negative numbers for angle.
- These parameters are “type based”, but can be overridden by clicking “Override Type Properties” which enables you to revise the angles.
- Note that the system won’t let you adjust the values so the result would make the wall taper to a point.
- You can dimension slanted and tapered walls at their cut plane or lower edges, and if you change the cut plane of the view the dimension will update.
- If the wall type is multi-component, only one component can be set to variable.
- If you try to swap a tapered wall to another type, only wall types that have variable components will be listed.
- Windows and doors have options to allow you to align them to either face of the wall.
Download PDF – KB-210124-Tapered Walls
- You must login to post comments
Please login first to submit.